PMM Barrel and Compensator Combos for Walther PDP (polymer frame)

Includes:

1x PMM Compensator for Walther PDP (polymer)

• Ultra Comp: 7075 Aluminum finished in type III class 2 hardcoat black anodize. Adds approximately 1″ to overall length.

OR

• Micro Comp: 4140 steel finished in Black DLC. Adds approximately 0.600″ to overall length.

1x PMM Threaded Barrel

• Material: 416 Stainless Steel heat treated to 38-42 HRC
• Rifling: Standard
• Twist: 1/10
• Caliber: 9mm
• Coating: Black Diamond Like Coating (DLC)

1 x Shim Kit

• 4 x 0.010″ Shim
• 2 x 0.005″ Shim
• 1 x 0.002″ Shim
• 1 x 0.05mL Vial Loctite 272

Optional Muschi Mounting Block

 

Note: Threaded pistol barrels are not legal in all areas. It is your responsibility to check your local laws before ordering a threaded barrel.  You also understand and agree that all firearms and firearms related activities are potentially dangerous if handled/conducted improperly and can pose risks and hazards to yourself and others, which may result in property damage, serious injury or death.

Compatibility:

• PDP Compact Series
• PDP Full-size Series
• PDP F-Series

NOT COMPATIBLE with:

• PDP Steel Frame
• Non-PDP Series Pistols
• PDP slides with a loaded chamber indicator

Barrel Compatibility:

• PMM Micro Comp for PDP
• PMM Ultra Comp for PDP
• NOT compatible with any other device or suppressor

 

PMM Recoil Spring Recommendation:

Our ultra comp for the PDP was designed around the factory spring, but you may want to change it out. We recommend not going any lighter than 15 lbs.

We personally like and recommend the ZR Tactical Solutions PDP Captured Guide Rod. It is also compatible with the ZR Tactical Solutions PDP Ultra Mass Guide Rod.

 

FAQ:

Q: What size do I choose?

A: We do not include the thread length in our length options– 4″ is compatible with a slide with a 4″ unthreaded barrel, or 4.6 factory threaded barrel. 4.5″ is compatible with a slide with a 4.5″ unthreaded barrel, or a 5.1″ factory threaded barrel.

 

Q: Can I buy just the micro or ultra comp?

A: Short answer, no. The barrel and comp are proprietary to one another. Due to the thread depth in the comp and the length of thread on the barrel, our barrel and comp can only be used together.

 

 

Size Guide:

Please order based off of slide length/ unthreaded barrel length.

3.5″ is compatible with the PDP F 3.5″.

4″ is compatible with a slide with a 4″ unthreaded barrel, or 4.6 factory threaded barrel.

4.5″ is compatible with a slide with a 4.5″ unthreaded barrel, or a 5.1″ factory threaded barrel.

5″ is compatible with a slide with a 5″ unthreaded barrel.

 

Flush Fit:

To achieve a flush fit look you will need a 4″ PDP slide and a 5″ full length frame paired with our 4″ ultra flat-faced barrel and comp.

A 4.5″ PDP slide and a 5″ full length frame with our 4.5″ micro barrel and comp will hang past the frame by approximately .100″.

Please note, a 3.5″ slide will only function on a 3.5″ frame, so not there are no flush fit options.

For flush fit, skip to minute six of the video below.

Flatface VS Bullnose

Install for Ultra

 

Install for Micro

 

Ammo Recommendations:

115gr:

Federal American Eagle

Speer Lawman

Wolf

Remington UMC

Sig Sauer

Fiocchi

Magtech

124gr:

Blazer

Speer Lawman

Federal American Eagle

Sig Sauer

Winchester

PMC

Remington UMC

147gr:

Most ammo will run, but you will see less performance due to a lack of velocity

 

Ammo to stay away from:

Blazer 115

Winchester White Box 115

Armscor 115

PMC 115

All reloads or reman ammo

PMM Disclaimer:

PMM reserves the right to make esthetical design changes. While we try to accurately represent our current product offerings’ designs, there may be some esthetical variation from the product posted on this page and the product you receive.