PMM AR15 Oversized Bolt Catch Paddle

The PMM Oversized Bolt Catch Paddle gives the shooter more surface area on the bolt catch to engage during magazine changes.

With two options of offsets, you can configure the release to your preference with an offset towards the muzzle and one offset towards the stock. The forward offset is better suited for right handed shooters, while the rear offset is better suited for left hand shooters. But either work better than a standard release.

Included:

• 1x PMM Oversized Bolt Catch w/ hardware
• 1x Loctite 242

*Supplied Hardware takes T-10 Torx driver. NOT supplied*

Features:

• Machined in-house out of 6061 aluminum
• Anodize type III class 2 hard coat in either black or FDE
• Angled surface for positive engagement
• Limited Lifetime Warranty
• Installation is simple and is done in minutes. Torque value = 5 in/ lbs
• Does not contact any critical components of the rifle during articulation

Compatability:

• Compatible with MIL-SPEC Upper Receivers & MIL-SPEC Bolt Catches only.
•  Not Compatible with the BCM MK2 uppers