PMM Duty Compensator for Glock

Included:

1 x PMM Compensator for Glock

• 7075 Aluminum finished in a type 3 class 2 Black or FDE hardcoat anodize
• 1/2 x 28 thread pitch
• No set screws, mounts like a muzzle device on a rifle.

1 x Shim Kit

• 4 x 0.010″ Shim
• 2 x 0.005″ Shim
• 1 x 0.002″ Shim
• 1 x 0.05mL Vial Loctite 272

Optional Muschi Mounting Block

 

Generation Guide:

Glock 45, 19x, 26 (all gens), 47, and 49 require a gen 5 comp.

Glock 34 gen 4 & 5 require a gen 5 comp. We do not recommend our comp for the Glock 34 gen 3.

We cannot guarantee fitment on the Glock factory threaded barrel. We advise against using our duty comp for these barrels.

These comps are designed to fit factory slides. If you are purchasing this for an aftermarket slide, please contact customerservice@parkermountainmachine.com to confirm which gen comp you will need.

 

 

Barrel Fitment:

PMM 1/2 x 28 threaded barrels for Glock can be found here, or save by buying a barrel and comp together.

Gap will vary depending on your barrel. We cannot guarantee fitment on the Glock factory threaded barrel. We advise against using our duty comp for these barrels.

See the attached print for reference. And watch the video above.

 

 

Recoil Reduction:

All of our compensators are tested in a ransom rest and measured with a digital inclinometer.

The PMM duty comp for the Glock was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)

 

 

 

PMM Holster Recommendation:

Cascadia Concealment 

T-rex

Tier 1

Active Retention (Level 2 & 3) Duty Holsters (Namely Safariland):

PMM Recommendation- RDR Gear

GLOCK:
G19 w/ duty comp = In between length of a G17 & G34 so a G34 holster is required.
G17 w/duty comp = G34 length and a G34 holster is required.

PMM suggests using high quality holster manufacturers and not ones who skimp on material and care more about marketing.. We have great success with T-Rex Arms and Tier 1 Concealment.
T-Rex Arms also has a “threaded barrel” option on its holster builders and this option will cover our Micro comps perfectly.

 

Ammo Recommendations:

115gr:

Federal American Eagle

Speer Lawman

Wolf

Remington UMC

Sig Sauer

Fiocchi

Magtech

124gr:

Blazer

Speer Lawman

Federal American Eagle

Sig Sauer

Winchester

PMC

Remington UMC

147gr:

Most ammo will run, but you will see less performance due to a lack of velocity

 

Ammo to stay away from:

Blazer 115

Winchester White Box 115

Armscor 115

PMC 115

All reloads or reman ammo

 

PMM Disclaimer:

PMM reserves the right to make esthetical design changes. While we try to accurately represent our current product offerings’ designs, there may be some esthetical variation from the product posted on this page and the product you receive.

 

DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that this
product is compatible with GLOCK pistols.

DISCLAIMER: “GLOCK” is a federally registered trademark of
GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and
GLOCK Ges.m.b.H. Neither Parker Mountain Machine & Armory nor
this site are affiliated in any manner with, or otherwise endorsed by,
GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page
is merely to advertise the sale of GLOCK pistols, parts, or components.
For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products
and parts visit www.glock.com.